MASTERFIT CONTACT LENS SOFTWARE UPGRADE
VERSION A12.1 (Date: 04/2006)
Software Information
If you have the optional MasterFit contact lens module, you must install this MasterFit software update after installing MasterVue System Software version A12.
Installation Requirements
 MasterVue Version A12.2 System Software must already be installed.
- A previous version of MasterFit must be present on the system.
- 2 formatted 3.5" floppy disks.
- A minimum of 3 MB disk space on your PC.
NOTE: If you are unable to transfer files to 3.5" floppy disks, contact
US: Call Carl Zeiss Meditec Customer Service at (877) 486-7473.
International:  Search contacts
Installation Instructions on your PC:
- Click the Download button on this page to start the download.
- Select Save to save the program to disk.
- Run the .exe file that you saved.
Installation Instructions on your Topographer:
- From the Main Menu select Utilities.
- On the Utilities form select Install.
- Insert MasterFit Disk 1 into drive a: and then select OK.
- The following message will appear: "Windows will restart now. MasterVue Setup will continue after system reboots"
- Select OK.
- After the system reboots, the following message will appear: "Select the language for this installation from the choices below"
- Select English or Deutsch and the OK button.
- The MasterVue System software will prepare the InstallShield wizard and complete the setup process for the optional module.
- The MasterVue System software will prepare the InstallShield wizard and complete the setup process for the optional module.
|  |